Quick Start Guide
Follow these numbered steps for each treatment session:
- Connect the device using the supplied USB charging cable.
- Disconnect the cable once the indicator displays a solid green circular light.
- Insert the included eye protection inserts firmly into the eye sockets.
- Cleanse and dry your face thoroughly to remove all cosmetics and oils.
- Adjust the head strap for a snug, balanced fit before placing the mask over your face.
- Toggle the master switch at the top of the frame to ON.
- Position the mask comfortably over your face and secure the strap.
- Tap the center forehead touch sensor firmly with your palm to turn on the LEDs.
- Tap above the right eyebrow sensor to cycle through light modes.
- Tap above the left eyebrow sensor to select your intensity level.
- Relax and undergo your session for 15 minutes.
- Tap the forehead sensor to turn off the LEDs, remove the mask, and switch the master power to OFF.
Tip: Touch sensors respond best to the flat surface of your palm rather than a single fingertip.
Light Modes and Benefits
The mask features four output intensity levels alongside eight distinct wavelength programs:
|
Light Mode |
Wavelength Profile |
Target Benefits |
|
Red |
Deep tissue stimulation |
Collagen regeneration, elastin production, fine line smoothing |
|
Blue |
Surface antibacterial |
Clarifying acne-prone skin, calming breakouts |
|
Green |
Pigmentation balancing |
Evening skin tone, fading dark spots, balancing sebum |
|
Yellow |
Vascular soothing |
Reducing redness, soothing rosacea, improving rough texture |
|
Purple |
Dual-spectrum (Red + Blue) |
Combined anti-aging and blemish clearing |
|
Cyan |
Calming vascular relief |
Soothing swollen capillaries, relieving mild skin inflammation |
|
White |
Broad spectrum |
Boosting cellular turnover, tightening skin laxity |
|
Cycle |
Continuous rotation |
Multi-benefit treatment cycling sequentially through all seven colors |
Safety and Contraindications
Review these requirements carefully before initiating any phototherapy regimen.
Contraindications
Do not operate this device under any of the following conditions:
- Pregnancy, planned pregnancy, or active nursing.
- Medical conditions involving photosensitivity, such as lupus erythematosus, photosensitive eczema, or albinism.
- Concurrent use of photosensitizing medications (e.g., specific retinoids, tetracyclines, or anti-arrhythmic agents).
- History of light-triggered migraines or light-induced seizure disorders.
- Genetic conditions affecting the eyes or retinas.
Precautions
- Always insert and wear the provided protective eyewear during treatment sessions.
- Never activate or operate the mask while the device is actively charging.
- Limit treatments to one 15-minute session per 24-hour period.
- Discontinue use immediately if skin experiences persistent erythema, itching, irritation, or unexpected sensitivity.
Care and Storage
- Wipe down the interior and exterior silicone surfaces with a mild facial wipe or a damp microfiber cloth after each use.
- Avoid cleaning the device with industrial solvents, rubbing alcohol, acetone, or abrasive scrubbers.
- Keep the device away from moisture, open water sources, direct sunlight, and extreme heat.
- Pack the mask securely inside its provided protective soft-shell case between sessions.
- Store the unit out of reach of children and pets.
Buy Cleopatra LED Mask
We’re offering a significant discount on our Cleopatra LED Mask to make our scientifically proven LED light therapy accessible to more people at home. Get one for yourself and let your skin glow like never before.
